Мисля да закупя лазерна система за подравняване на валовете? Тези системи са известни с правилното подравняване на машините, така че да могат да работят с максимална производителност, и помагат да се удължи живота на машините. Прецизната точност е една от основните им предимства.
Кои са някои неща, за които трябва да помислите, когато купувате лазерна система за подравняване на валове?
Single vs Dual Lasers
Are you going to get a system that has single-laser technology or dual-laser technology? Keep in mind that dual-laser technology involves having to adjust two lasers and two sensors– so they’re a little more involved than single-laser systems. Why choose a single-laser system? Ами, they have a “freeze frame measurement” capability, so you can complete measurements when halted midway through a job because of the amount of misalignment. This is better than having to restart. Also, dual-laser systems don’t handle gross misalignments well.
Right System Fits
If you’re looking at a system that requires a “rough alignment,” that one can cost more to operate since it will demand more moves, making it a bit time-consuming.
System Measurements and Variables
You’ll want to know if the system shows a visual quality-factor assessment indication as measurement is underway versus only after the measurement is finished. очевидно, to save time, you’d prefer to get feedback during measurement so things can be adjusted as needed, rather than waiting until the measurement is finished.
Does the system allow measurements to easily be shared with others so they can help figure out “next steps?” It’s great if measurement data can be evaluated/qualified remotely via “the cloud.”
Накрая, find out if the system automatically handles uncoupled shafts or if it requires manual efforts to position shafts at the correct relative angle.
Looking to buy a laser shaft alignment system? Обадете Зайферт Industrial при 1-800-856-0129 with your questions or use the online contact form, Тук.
