Note: Tabbatar cewa yi surface ne free of datti da kuma nicks, kamar yadda wannan na iya shafar your karatu.
1. Dutsen da SX-5150T Laser watsawa naúrar kan tsit ko reference yi. Shin wannan kamar haka:
wani) Ƙugiya madauri na isasshen tsawon gefen hagu da kuma dama firam na mayar da SX-5150T watsawa Unit, da kuma sanya watsawa Unit a kan keken yi haka shi mai fuskantar da Roll za ta jijjigu (RTBM), da kuma rike da shi! (Dubi Figures 1 da kuma 2)
 Figure 1 |
 Figure 2 |
b) Yanzu kawo da madauri a kusa da yi da kuma saro su a hagu da kuma dama firam a gaban gefe na watsawa Unit (Dubi Figures 3 da kuma 4).
 Figure 3 |
 Figure 4 |
Ka yi kokarin yi lilo da watsawa Unit don tabbatar da shi yana zaune m da square a kan yi. Yi amfani da feeler ma'auni (0.001") don tabbatar da cewa duk wuraren da sashi suna yin cikakken lamba tare da yi surface.
tip: Idan kana da wani sosai m yi surface, sanya wani roba takardar na shim stock tare da m kauri da 0,003 "da kuma girman 6" x24 "tsakanin yi farfajiya da RollCheck.
Wannan zai kare surface na yi, kuma ba zai shafi your jeri.
2. Dutsen da SX-5150R Reflector naúrar kan Roll za ta jijjigu (RTBM). Shin wannan kamar haka:
c) Ƙugiya madauri na isasshen tsawon gefen hagu da kuma dama firam na mayar da SX-5150R Reflector Unit, da kuma sanya Reflector Unit a kan Roll za ta jijjigu (RTBM), da kuma rike da shi! (Dubi Figures 5 da kuma 6)
 Figure 5 |
 Figure 6 |
d) Yanzu kawo da madauri a kusa da yi da kuma saro su a hagu da kuma dama firam a gaban gefe na Reflector Unit (Dubi Figures 7 da kuma 8).
 Figure 7 |
 Figure 8 |
3. Kunna watsawa Unit da kuma tsayar inda watsawa ta tsaye Laser line ta sãmi Reflector Unit. idan dole, juya da watsawa Unit yi da a tsaye Laser line buga tsaye tsagi a kan Reflector Unit cewa an located sama da kuma a kasa da madubi a cikin cibiyar.
4. Idan ka sami cewa a tsaye line ba ta zo daidai da wannan tsaye tsagi na Reflector naúrar, shi zai zama dole don slide da Reflector Unit kaikaice har shi bai daidaita. Zamar da Reflector Unit kaikaice a kan ta yi kamar yadda ake bukata don yin da watsawa a tsaye Laser line buga tsaye tsagi a kan Reflector Unit, sake-m da madauri idan ya cancanta, tabbatar da Reflector Unit ne m zuwa yi.
5. Yanzu kalla inda watsawa ta kwance Laser line ta sãmi Reflector Unit. idan dole, juya da watsawa Unit yi a kwance Laser line hits kusa da cibiyar da gaban da Reflector Unit.
6. Yanzu juya da Reflector Unit don haka kamar yadda matsayi a kwance tsagi kai tsaye a kan riwayar kwance Laser line.
7. Duk wani a tsaye misalignment na Rolls za a yanzu za a gani a cewa watsawa ta kwance Laser layi ba daidaita daidai da baki kwance tsagi a tsakiyar Reflector Unit. A Laser line za a lura ya zama dan kadan high a daya karshen da kuma dan kadan low a sauran. (Dubi Figure 9)
Figure 9
Note: Roll da za a koma (RTBM) ba a kan wannan jirgin sama kamar yadda da tukwãne yi.
8. Yanzu ta da ko ƙananan daya ƙarshen Roll za ta jijjigu (RTBM) yi a kwance Laser line wasa tare da baki kwance line a kan Reflector Unit. A lokacin da wannan ne yake aikata, ka gyara da a tsaye kwana ko farar cewa wanzu tsakanin Rolls. (Dubi Figure 10)
Figure 10
Note: Roll da za a koma (RTBM) ne yanzu a kan wannan jirgin sama kamar yadda da tukwãne yi.
9. Yanzu ga cewa nuna tsaye Laser line aka karin da watsawa Unit. idan dole, juya da Reflector Unit don sa da nuna tsaye Laser line ya buge da watsawa Unit ta cikin cibiyar.
10. Kiyaye idan nuna tsaye line an hada kai tare da tsaye baki layi na watsawa Unit. Idan shi ba, kana da a kwance kusurwa misalignment (rashin layi daya) tsakanin Rolls wanda dole ne a gyara. (Dubi Figure 11)
Figure 11
11. Matsar daya ƙarshen RTBM kaikaice kamar yadda ake bukata don sa da nuna tsaye Laser line ta zo daidai da daidai da a tsaye tsagi a tsakiyar watsawa Unit. Da zarar sun yi, ka cimma a layi daya jeri na Rolls kuma aikinku shi ne kusan gama. (Dubi Figure 12.)
Note: A nuna kwance Laser layi yana da wani muhimmanci.
Figure 12
Note: Nuna Laser line nuna cewa Rolls ne a layi daya zuwa daya da wani
12. Yanzu cire watsawa da Reflector Units daga duka Rolls.
Tsanaki!! Kasance musamman da hankali ga riƙe watsawa da Reflector Unit yayin da cire da madauri haka ba su ba zato ba tsammani fada kashe na yi!!!
13. Yanzu remount da watsawa da Reflector Units kamar yadda aka bayyana a cikin Matakai 1 ta hanyar 6, da kuma tsayar da cewa watsawa a kwance Laser layi har yanzu daidai da kwance baki layi a kan Reflector Unit, da kuma cewa nuna tsaye Laser layi har yanzu daidai da a tsaye baki layi a kan watsawa Unit. su ya kamata, kuma wannan shi ne amincewa rajistan shiga da cewa raka'a aka yadda ya kamata saka karo na farko a kusa da, da kuma cewa da ka yi aiki mai kyau na aligning your m yi zuwa ga tsit reference yi.
Note: Cire duk aka gyara da kuma yin wasu cewa ba sako-sako da sassa aka bari a baya a ko'ina a cikin aikin yanki.
Cajin Umarnin
Note:The caji tashar jiragen ruwa da aka located a baya na Laser watsawa. |
Note: The caji LED aka located a kan gaba na Laser watsawa. |
A RollCheck sanye take da wani sauya lithium ion baturi tare da mai gudu lokaci daga 16 to 20 hours m.
A ja LED zai nuna matsayi na naúra kamar yadda aka caji.
Lokacin da cajar yana plugged cikin watsawa, da ja jagoranci ne hasken har sai da cikakken cajin, da ja jagoranci zai kashe a lokacin da baturi gama caji.
Cajin lokaci game da 5 hours.
